LIGHTING DEVICE: ET103

"COLOR FOUNTAIN" WATER SENSITIVE ILLUMINATOR, TURBINE SELF POWERED

The product is a compact and monolithic element. It is a component studied to fit into a properly machined faucet spout or hand shower.

Composed by:
• An axial turbine located on the mixed water hydraulic line
• One electronic with built-in light sources, whose task is to control
• their intensity and their mixing according to the temperature of
• the liquid that strikes it, therefore it is defined a specific
• relationship between temperature and mixing of the light sources.
• An aerator that allows to achieve the point of incidence between
• aerated water and light sources. This is in order to create a
• lightable virtual solid thanks to the presence of the mixture of air
• and water (aeration).
• The optic conduction of the aerated liquid thus allows to intensify
• the contact point, coloring the water. The main concept is that
• only an aerated flow can be radially illuminated.
• A laminar flow (where aeration is not present) behaves as optical
• guide thereby not allowing the lighting of the water.

There are no wiring and electrical cables coming out of the component and no batteries are installed.

Our device can be fitted inside a faucet or component with an appropriate machined seat inside (for example a kitchen mixer showerhead) or the seat can be made at the insertion point of the same (mixer spout).
The component can be freely used not bindind the tap manufacturer to further working or post-working processing (e.g. resin casting), moreover the COLOR FOUNTAIN must be fitted with a simple aerator, that means the manufacturer can easily use the same body or spout with or without the device: the fitting thread allows to install a common M24x1 aerator.

Being a component, the product can be easily removed without risks from its housing by the final user, in any case of need.

TECHNICAL FEATURES:

• The power supply is generated by a water powered generator
• placed inside the product, there is no need of batteries or
• electrical connection; just the water flow is necessary to let the
• product work properly.
• The cartridge indicates the temperature of the supplied water
• generating different colored lights in the water stream.
• Temperature sensor.
• The device displays with red color the extreme hot water
• temperature, so when it goes over about 44°C.
• High intensity of light generated
• There is no electical or electronic component in contact with water
• (all component is correctly isolated for the best longlasting of the
• cartridge).
• Totally wireless.
• An inlet filter is included in order to prevent the water powered
• generator to receive solid impurity from the water flow.
• The product fully operates at about a flow of 2,5 l/min.
• The intensity of the light does not depend on the quantity of
• water flowing through the product.
• The turbine noise is very limited.

Working Temperature: 5 °C → 65 °C
Max Pressure: 10 Bar
Suggested Pressure: 5 Bar
Electrical Temperature Protection: 65 °C → 85 °C

AVAILABLE PRODUCTS: